Original file (806 × 534 pixels, file size: 166 KB, MIME type: image/jpeg)
|
Source → STMicroelectronics |
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:35, 7 November 2024 | | 806 × 534 (166 KB) | Registered User | Merge articles upload |
You cannot overwrite this file.
The following 4 pages use this file:
This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.
If the file has been modified from its original state, some details may not fully reflect the modified file.
| Camera model | SM-G780G |
|---|---|
| Camera manufacturer | samsung |
| Date and time of data generation | 17:34, 24 October 2024 |
| Exposure time | 1/50 sec (0.02) |
| F Number | f/1.8 |
| ISO speed rating | 250 |
| Lens focal length | 5.4 mm |
| Vertical resolution | 72 dpi |
| Horizontal resolution | 72 dpi |
| Width | 4,032 px |
| Height | 2,268 px |
| Y and C positioning | Centered |
| Orientation | Normal |
| File change date and time | 17:34, 24 October 2024 |
| APEX aperture | 1.69 |
| Exif version | 2.2 |
| Scene type | 49 |
| APEX exposure bias | 0 |
| Exposure Program | Normal program |
| Color space | sRGB |
| Maximum land aperture | 1.69 APEX (f/1.8) |
| APEX brightness | 1.14 |
| Supported Flashpix version | 1 |
| DateTimeOriginal subseconds | 059643 |
| White balance | Auto white balance |
| Exposure mode | Auto exposure |
| Flash | Flash did not fire |
| DateTime subseconds | 059643 |
| Meaning of each component |
|
| Focal length in 35 mm film | 26 mm |
| DateTimeDigitized subseconds | 059643 |
| Date and time of digitizing | 17:34, 24 October 2024 |
| APEX shutter speed | 5.645 |
| Metering mode | Spot |
| Scene capture type | Standard |
| Light source | Unknown |
| Sensing method | Undefined |
Discover STM32 application processors and get ready with industry 4.0 on st.com site
If you have any question or request concerning this wiki or if you see some pages with some mistake, you can report them using ST Support Center or ST Community MPU Forum.
