STM32WB0 Bluetooth® LE hardware setup

This message will disappear after all relevant tasks have been resolved.
Semantic MediaWiki
There are 1 incomplete or pending task to finish installation of Semantic MediaWiki. An administrator or user with sufficient rights can complete it. This should be done before adding new data to avoid inconsistencies.

Click here for Bluetooth® LE overview.

1. STM32WB0 boards

1.1. NUCLEO-WB09KE board

NUCLEO-WB09KE[1] is a Bluetooth® Low Energy wireless and ultra-low-power board embedding a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.4:

  • STM32WB09KE[2] microcontroller based on the Arm® Cortex®‑M0+ core, featuring 512 Kbytes of flash memory and 64 Kbytes of SRAM in a VFQFPN32 or WLCSP36 package.

The NUCLEO-WB09KE is composed of:

  • MCU RF board (MB2032):
    • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.4
    • High performance and ultra-low-power 32-bit Arm® Cortex® M0+, running up to 64 MHz
    • Integrated PCB antenna
  • Mezzanine Board (MB1801)
    • Three user LEDs
    • Three user and one reset push button
    • Board connectors:
      • USB Type-C®
      • ARDUINO® Uno V3 expansion connector
      • ST morpho headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK USB VBUS or external sources
    • On-board STLINK-V3 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
    • Comprehensive free software libraries and examples available with the STM32CubeWB0 MCU Package[3]
    • Support of a wide choice of integrated development environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
NUCLEO-WB09KE
Connectivity Connectivity Nucleo WB09KE.png



Info white.png Information
Please refer to this article for more information regarding debug tips with STM32WB0x/Nucleo-WB09KE while Low-power mode is active.

1.2. NUCLEO-WB07CC board

NUCLEO-WB07CC [4] is a Bluetooth® Low Energy wireless and ultra-low-power board embedding a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.4:

  • STM32WB07CC[5] microcontroller based on the Arm® Cortex®‑M0+ core, featuring 256 Kbytes of flash memory and 64 Kbytes of SRAM in a VFQFPN48 package.

The NUCLEO-WB07CC is composed of:

  • MCU RF board (MB2119):
    • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.4
    • High performance and ultra-low-power 32-bit Arm® Cortex® M0+, running up to 64 MHz
    • Integrated PCB antenna
  • Mezzanine Board (MB1801)
    • Three user LEDs
    • Three user and one reset push button
    • Board connectors:
      • USB Type-C®
      • ARDUINO® Uno V3 expansion connector
      • ST morpho headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK USB VBUS or external sources
    • On-board STLINK-V3 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
    • Comprehensive free software libraries and examples available with the STM32CubeWB0 MCU Package[3]
    • Support of a wide choice of integrated development environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE


NUCLEO-WB07CC
Connectivity Connectivity Nucleo WB07CC.png



Info white.png Information
Please refer to this article for more information regarding debug tips with STM32WB0x/Nucleo-WB07CC while Low-power mode is active.

1.3. NUCLEO-WB05KZ board

NUCLEO-WB05KZ [6] is a Bluetooth® Low Energy wireless and ultra-low-power board embedding a powerful and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification v5.4:

  • STM32WB05KZ[7]microcontroller based on the Arm® Cortex®‑M0+ core, featuring 192 Kbytes of flash memory and 24 Kbytes of SRAM in a VFQFPN32 package.

The NUCLEO-WB05KZ is composed of:

  • MCU RF board (MB2032):
    • 2.4 GHz RF transceiver supporting Bluetooth® specification v5.4
    • High performance and ultra-low-power 32-bit Arm® Cortex® M0+, running up to 64 MHz
    • Integrated PCB antenna
  • Mezzanine Board (MB1801)
    • Three user LEDs
    • Three user and one reset push button
    • Board connectors:
      • USB Type-C®
      • ARDUINO® Uno V3 expansion connector
      • ST morpho headers for full access to all STM32 I/Os
    • Flexible power-supply options: ST-LINK USB VBUS or external sources
    • On-board STLINK-V3 debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
    • Comprehensive free software libraries and examples available with the STM32CubeWB0 MCU Package[3]
    • Support of a wide choice of integrated development environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
NUCLEO-WB05KZ
Connectivity Connectivity Nucleo WB05KZ.png


Info white.png Information
Please refer to this article for more information regarding debug tips with STM32WB0x/Nucleo-WB05KZC while Low-power mode is active.

2. References

  1. ↑ NUCLEO-WB09KE board
  2. ↑ STM32WB09KE
  3. ↑ 3.0 3.1 3.2 STM32CubeWB0 MCU Package
  4. ↑ NUCLEO-WB07CC board
  5. ↑ STM32WB07CC
  6. ↑ NUCLEO-WB05KZ board
  7. ↑ STM32WB05KZ



Retrieved from "https://wiki.st.com/stm32mcu/index.php?title=Connectivity:STM32WB0_BLE_Hardware_Setup&oldid=67398"